88th Krieg-division, Siege of Vraks

[center]

88th Krieg-Division

Siege of Vraks Imperial is a military campaign which lasted for 17 years, to take the territory that is hand heretical Chaos led by Cardinal Xaphan. Vraks was be sieged by the Imperium in 813.M41, after the assassination attempt by an agent of the Office of Assassinorum heretic and traitor Cardinal Astra Scarus sector, Xaphan, failed. Since the 88th Regiment Headquarters Death Korps enter wear a seat.

[/center]

- Models:
. figurines and vehicles Forgeworld
. vehicles GamesWorkshop
. Heavy vehicles-Support

- Materials:
. airbrush with compressor
. Prince August Brushes / Kolinsky Tobolsky, Games Workshop
. Panzer Azes acrylics paints / Prince August, Games Workshop
. Prince August paint airbrush
. bases paints (primer) Prince August
. matt and gloss varnish Prince August
. oil paintings
. pigments Forgeworld
. diluent and fixer pigments
. Games Workshop wash

I will use the products and technical designers of figurines warhammar 40K. This is a first for me too, its going to be step by step. I'll try to explain as all ...

Here is the first part in assembly (in proximity of Leman Russ Heavy-Support):






Sorry for the quality of photos, but it is only mounting, so it's no big deal.

Well... maybe I'm an old fart and a closed mind, but sincerely I don't understand why to make models from WH40K like WWII german forces.
I know that there's a lot of resemblance with armies from WWI and WWII, but there are a lot of 1/35 models of WWII armies.
Howewer this is you army and you can do everything you want with it.
Sorry for this acid reply.

(I hope to see not any balkankreuze or worse...)

Tastes and colors ...
I like warhammer 40K and the Second World War, this is an opportunity to connect the two!
If it does not please I can understand, but if I post this is not to have a debate about it but on my future montages / paintings.

What's bothering you is perhaps the story? But ultimately, it will just be a warhammer 40k army playable but painted the pattern of German ...

As I said before that's your army and you can do it how you like it.
It was just my opinion and maybe it was not necessary.

I would have to say that it is more about what inspires us, and in modifying the tanks we make them unique and truly our own.

Should I delete my post ...?

i dont think their is any replys that warrent deleting your post. This forum after all is about sharing what we have done and getting comments and criticism about it.

I should be starting my own thread in the next few days feel free to come and post any criticism you can think of.

well as soon as my mail orders arrive. aint it always funny how the last thing you order always arrives first

side note: i do like the tank mod it just Needs imperial rivets

Not finding modelers to mold a tank wheel, I flip on the tube of plastic card, I found the right mm (10mm). I would fill the hole with the green stuff and I think it should.
So the Panzer is waiting ...

But here's a command:



At the price I found, I jumped on it ($ 22).

In history, the renegades can play the role of other factions affected by nuclear radiation.

Absolutely NOT! This is a free forum and everybody could post anything (without breaking the rules ).
There are positive feedbacks and negative rants, mine was a opinion not an order...

Hello;

Ogryn Berserker Boss with Death Korps of Krieg received.

Cleaning and assembling (the base is not the final, it is awaiting receipt of DragonForge in):






This is a beautiful figure, well detailed, what a treat!

I think using a white undercoat.

For (s) death korps I just ordered a set of paint ww2 German in Prince August. So I will put on the waiting Ogryn! I thought, skin, flesh rotting. For metal, rusty something good. And for the rest, tones brown / green.

PS: for the tank I'm still waiting for my tubes plastic card ...

That was a fun model to paint. It was a nice change of pace from the rank and file troopers. I look forward to seeing how yours comes out.

Hello;

I finally bought the white undercoat, I concur, this is much better than the black for details! I will try to take pictures step by step to make a kind of tutorial.

So the Ogryn undercoating:



Then a shipment of paintings Prince August and a matt varnish:



For the moment I bought the main colors for the figures, I hope not to have forgotten ...

Painting is already diluted basis compared to GW, there are so many shades.

The tip (which can open) is a kind of system to account taste, not very practical to put everywhere and for an optimal mix!

That's all for now.

PS: next purchase, the airbrush.

Hello;

I just finished the skin of the Ogryn.

Sorry for the first and the last picture (the last will be redone when I have stacks ...).

Little tutorial:

Use a pallet to keep the mixture moist cool (box + towel + water + baking paper), and paint your still good after hours. Place in refrigerator to return the next day (photo next time).

Primary:

- Magenta Prince August: 1 taste
- Beige Red Prince August: 2 taste
- Brush standard GW: base layer



First clarification:

- Beige red PA: 1 taste
- Flesh base PA: 2 taste
- Brush 8 PA: brushing



Second clarification:
- Flesh base: 2 taste
- Brush 8 PA: brushing

http://i411.photobucket.com/albums/pp197/s...2/obbwdkdp3.jpg

He even missed the scratches, I've got to think about it some more.

I prefer to wait to finish the whole figure to go from matte varnish and ask after my wash.

Hello;

Due to lack of batteries for the camera, I was not able to take pictures for every step ...

But I will still explain!

Following the skin:



Darkening:

- Wash Ogryn flesh GW: diluted, especially in the hollows
- Wash baal red GW: only in the holes in the skin

Bones:

- White PA: base layer
- Wash baal red GW: Effect dried blood
I want to add some gloss in the scratches, no?



Metal:

- Gun metal gray PA: base layer
- Wash Badab Black GW: darken
- Silver PA: to clear brush
- Pigment rust Sennelier: light, dry and secure place with PVA glue diluted with water

Armor:

- Gretchin green GW: base layer
- Silver PA: to clear brush
- Wash mud Devlan GW: only in the hollows and on the details
- Pigment rust Sennelier: light, dry and secure place with PVA glue diluted with water

Dried blood on armor:

- Wash baal red GW: bright features fine brush in all directions

Power cables:

- Red Cadmium Vermillion PA: base layer
I think to put the gloss, right?



Leather Hood:

- Burnt umber PA: base layer
- Mix burnt umber PA and orange brown PA (one drop of each, brushing): first thinned
- Orange Brown PA, only on the edges: the second thinned
- Wash Gryphonne sepia GW: darkening

Eyes:

- Gun metal gray PA: base layer
- Green Goblin PA: diluted coat
- White PA: brushing
- Wash green Thraka GW
I think to put the gloss, right?

Here, thank you.

Hello;

I pushed the bottom of the figure:







Pants:

- Red Cadmium Vermillion PA: base layer
- Mixing intense orange PA and red cadmium vermilion PA, brushing: first thinned
- Orange intense PA, on the edges: second thinned
- Wash baal red GW: darkening

For boots, I expect to receive my base before the start.

Thank you.

Seems to come along nicely.
I like the skin of the Berserker together with the olive drab metal parts.
I'm not so sure about the brownish hood though - but maybe later when some more details are added it will look better.
Keep the updates comin'
Cheers
Klaus

Hello;

Here is a little more for decoration:

Smoke Explosion:





- Cotton
- Yellow LED candles (real candles effect)
- PVA glue to stick to the candle
- Give the shape you want to cotton



- Undercoat Black, will also harden the cotton and to hold



- Early stage with Orks a friend

Personally I love, what do you think?

Thank you!

@Klaus: What you add on the hood?

What manufacturer is that? It looks like FW, but I don't think that is.

No it's not the FW is one of Battletank Mortian Heavy, Heavy-Support:

http://gwfwmort.bplaced.net/web1/index.php...cchk=1&Itemid=8

That candle/smoke effect is totally stolen.

Nice work here, but your barrell on the Vanquisher seems to be slightly droopy. Maybe its the angle of the camera shot.

What you mean by "stolen" ...?

I just want to share what I discovered and show that this technique is very effective.

I did not know there was a user right for this technique.

The goal of the hobby is not sharing?

I may be incorrectly interpreted "stolen", I'm French ...

For the tank's cannon, it is an effect on the picture, it is straight;).

Thank you.

he means he thinks that your idea is so good that he (Pax) is going to do the same (=steal your idea)

some kind of compliment that is

Oh sorry ... I have trouble with some meaning.

consider it doubley stolen, love the idea and would definatly be looking at adding some variation.

thanks for a great idea mate.
millest

And again. I've never been a fan of wrecked vehicle markers but this is phenomenal and I would absolutely use these in a game.