Cobra 29LTD

D11

anyone know what it is? the part number or whatever? and it is a run of the mil part that the local rat shack would have?


my mobile had it taken out, butwipes. so i took it out my parts 29... and welp i dropped it and aint seen it since and i want to run my palomar TX75 with it. so i need to lower my deadkey which is 10W right now

I'm not up on which circuit D-11 is for..
If it's to open up the modulation then replacing it won't lower your dead key at all. Have a look at cb tricks, it'll tell you which is the power adj.


Which 29 is it? LTD, Plus, GTL, ST...

http://www.angelfire.com/fl2/cbradiorepair/cobramods.html

Most "so called" techs will either lift or cut D11. When cut or lifted, it's pretty much a wide open deadkey, which is retarded if you ask me, but hey, who am I.

When D11 is cut/lifted, VR4 becomes useless.

rustbucket

the D11 is in the modulation ciruit. its the limiter. if you cut that it bypasses the VR4, the vr for modulation.

i think thats half right??

and plus i want to bring the thing mostlyback to stock, for sumthin to do i guess lol,

eli

29 LTD:

1. OVERMOD: Check D11
2. PLL dead, no TX or RX: Shorted C112
3. No TX/RX with Channel LED lit on RX and then goes out when keyed: Bad /shorted C119.

is that what you wanted me to look at?

I did not know this. Well if thats the CB shop way then i'm sure they have buckets of diodes laying around.

most of the time, I've just seen them lifted. I guess that's the professional way of doing a hack job

haha I've lifted them on radios that the diode is the only modulation tweak.

If the diode is the same on a 25 classic Philippine i'll check to see if my parts radio has that diode in it. Snail mail it?

I tape them to the top of the inside..

when i switched the ch9 switch to a ch 19, i just unsoldered one side and lifeted it up



and well this idiot took it out

That's why your in the " Christmas CB'er" member group, lmao

Merry Christmas!!!!

lol what does christmas cber mean any how?



my bad rustbucket... 29LTD made in 89 in the PHLIP

Give ya 15 bucks for it squirrel...

Christmas Cb'ers are the ones that get there radio for Christmas and get on the air and sound like id10t's. OVER.

10-4

nope rustbucket lol thats the only radio got thats worth a half a squat right now

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...:MEWN:IT&ih=003

just got that for the ol lady's car. are they any good? lol nice lookin radio too

i may sound like an idiot out there lol but i bought my radio lol



and i think the avatars, the codes or whatever need to have the two colons beside them lol or else like my last post lol

Squirrel, IMHO, you really need to invest in a good mobile radio, instead of all these old dead Cobra's & other radios your getting. After getting a good, new radio, you will see that you saved yourself some money by doing so, instead of repairing your old ones.

My recomendations: Galaxy! ::

It's a cute radio..


It should do alright, Atleast it has a ANL switch to knock out the noise. Worth the $12.
I'd give $12. because it has clean looks to it.

Now open the modulation a little on it so it'll get out more than 3 blocks.



PS. No clipping lol